Sur le même thème

16 Commentaires

  3. Literally no smell decarb this way:

    1. Use a ball mason jar (pickle jar is a bad idea, be resourceful and find a mason jar)

    2. Put you weed in the jar, and make sure you put the lid on UPSIDE DOWN so the rubber is up. Tighten the ring so its a little snug. DON'T reef it down.

    3. Put it in a turkey/oven bag, and tie a knot

    4. Put the jar in the oven, THEN turn your oven to 230 degrees f. I did this so the jar warmed up with the oven, and didn't risk any glass breaking (according to google, ball jars can go up to 250 degrees, so I stayed at 230. Decarbing with boiling water technically isn't hot enough to turn THCA into THC, this is what you want)

    I popped some popcorn once the oven heated up, but tbh, that was overkill. I literally smelled nothing, and I was sober when I did this.

    5. I lightly shook the jar every 15 minutes. After about an hour, the weed turned brownish, and brownish is what you want. Look up decarbed weed on google to get a sense for this. Pretty sure you don't want 100% dirt brown

    6. Best way to let it cool is by turning the oven off, and letting the jar sit in there while it cools.

    -Make sure to always handle with mitt's so you don't burn yourself.

    -Do this when you aren't high.

    -Be careful when you remove the oven bag, it will smell. You can do this outside, but don't do it outside if its really cold and your jar is hot. You risk shattering you jar.

    -Also be careful removing the jar lid, it will also smell when you do that.

    Hope this helps! Worked great doing it this way.

    Thanks for the video, I watched a bunch of videos like this to get a good idea of what to do

    Répondre

  8. I have my own business and need a accurate device to test cbd and thc I have cbd products I make and sell so need accurate device can't make any mistakes with my company or my products I will do my own review if a company sends me one to review with return label if I like I will buy it

    Répondre

  11. Really dig your videos. It's so hard doing the math trying to calculate your on mg per batch. This looks amazing. I have a question though your oil came out to 86mg per tablespoon and 12 tablespoon in 3/4 cup. And 3.5 grams flowers. Does that mean the herb gave you over 240 mgs per gram aka 24% thc?
    Blessings and raspect

    Répondre

  12. Hello thanks for the video! What was your sativa testing at prior to infusion (%) The percentages posted in video are the potency per measurement per extract so that 28% you tested was per teaspoon or tablespoon. So the bigger the measurement the higher the potency ?

    Répondre

Laisser un commentaire

Votre adresse de messagerie ne sera pas publiée.


*